P.O. Box 267814, Chicago, IL 60626 U.S.A.
Tel: 1-773-465-7285 | Fax: 1-773-465-7387
E-Mail: abt@abtonline.com
|
P.O. Box 267814, Chicago, IL 60626 U.S.A. Tel: 1-773-465-7285 | Fax: 1-773-465-7387 E-Mail: abt@abtonline.com |
      
|
* 304 stainless steel
* 12 gauge side walls withel 90 Screw Auger
* Complete with motor and controls
* 304 stainless steel
* 12 gauge side walls with steam jackets
* 2" glass insulation
* 14 gauge cladding
* 1.5" tri-clover drain
* 1.0" vent tube
* 1 h.p.
* 230 v. single phase
* 304 stainless steel
* 12 gauge side walls with dimpled glycol cooling jackets
* 2" glass insulation
* 14 gauge cladding
* 1.5" tri-clover drain
* 1.0" vent tube
* 116" I.D., 120" O.D., 10'2" overall height
* 3/16" ASME domed top head
* 10 gauge side wall with 2" 1.75' glass insulation
* 16" x 20" top manway
* One 150 watt interior light
* 5" grain hydrator
* 8" vent collar with condensate drain
* CIP set-up with spray ball
* Top sparge system
* 2 hp SEW gear drive, vari-speed with rake assembly
* 16 piece V-wire screen
* 14 gauge #4 finish cladding
* 19" side grain door
* Four 1.5" wort drains
* 1.5" wash drain
* Four 1.5" valves and clamps
* Four 5" s/s legs with braces and adjustable feet
* Gross weight: 3,600 lbs., empty
* 14 gauge #4 finish s/s
* Four valve feed from lauter tun bottom quadrants
* Four valve sight glasses
* 72" I.D., 76" O.D., 84" shell height, 10'2" overall height (not including
agitator or vent)
* 3/16" ASME dome
* 10 gauge side wall with 24" steam jacket
* 10 gauge shallow cone bottom with two steam jackets
* 1.25" supply on all steam jackets with 1.0" return
* 2.0" ceramic insulation on sides and bottom, rated to 2,400° F.
* 12.0" s/s vent collar with condensate drain
* 150 watt s/s interior light
* CIP sprayball with down tube
* 16.0" x 20.0" manway
* 1.5" wort inlet
* Two (2) temperature probes
* 14 gauge #4 finish s/s outside cladding
* 12 gauge bottom cladding
* 3.0" tri-clamp drain with valve
* Four (4) 5.0" dia. s/s legs with adjusters
* NEMA 4 enclosure
* 304 s/s construction
* Steam kettle control
* Lauter temperature control
* All motor controls
* Vessel light controls
* Two (2) 2 hp. pumps, 2.0" in, 1.5" out, 230 V, 3-phase, 1,725 RPM
* One (1) 2 hp. pump, 1.5" in, 1.5" out, 230 V, 3-phase, 3450 RPM
* One (1) 1.5 hp. pump, 1.5" in, 1.5" out, 230 V, 3-phase, 3450 RPM
* All s/s construction
* OSHA approved steps and handrails
* Mounting brackets for control panel
* Thermalane model T20-AL sanitary plate heat exchanger
* Two-stage/glycol assisted
* T-304 s/s frame with glycol assist
* 101 CH type 316TI s/s sanitary flow plates with food grade EPDM gaskets
* 35 GPM flow rate
* 210° F to 55° F in @ 45 minutes
* All s/s construction
* Sterile air feed into cooled wort flow
* All s/s 2.0" wort piping for recirculation, sparging and transfer
* All s/s 1.5" water piping
* 850,000 BTU rated
* Low pressure
* Condensate tank
* Buyer's contractor responsible for steam traps and solenoid valve
* 84" I.D., 88" O.D., 120" shell height, approx. 20' overall height
* 10 gauge s/s SF&D top
* 10 gauge s/s 60° cone bottom
* 10 gauge s/s side wall
* 14 gauge s/s outside cladding with 3$ finish
* Two (2) 30" side cooling jackets totaling 90 sq. ft. of cooling surface
* 24" bottom cone jacket
* 2" 1.75 lb. glass insulation
* CIP spray ball and down tube with 3/8" gas valve and pressure gauge
* Vacuum pressure relief valve
* Ladder hook
* Two (2) removable lifting lugs
* -40° F to 160° F thermometer
* 18" x 20" manway door
* Perlick zwickle
* Bottom cone rackport
* 1.5" bottom drain
* Two (2) 1.5" valves and clamps
* Four (4) 5.0" dia. s/s legs with adjustable feet and braces
* 12 gauge 304 s/s side walls
* Domed top
* 12 gauge s/s SF&D top
* 12 gauge s/s 60° cone bottom
* 14 gauge s/s outside cladding with #4 finish
* Two (2) 15" side cooling jackets totaling 45 sq. ft. of cooling surface
* 12" bottom cone jacket
* 2" 1.75 lb. glass insulation
* CIP spray ball and down tube with 3/8" gas valve and pressure gauge
* Vacuum pressure relief valve
* Ladder hook
* Two (2) removable lifting lugs
* -20° F to 120° F thermometer
* 16" x 22" manway door
* Perlick zwickle
* Bottom cone rackport
* 1.5" bottom drain
* Two (2) 1.5" valves and clamps
* Four (4) 3.0" dia. s/s legs with adjustable feet and braces
* 20 hp unit
* Pump and storage tank included
* Low ambient damper
* Outdoors set-up
* Five year warranty on compressors
* Della Toffola model #SM-3
* Three square meter horizontal pressure leafs
* Mechanical agitator
* Micrometer dosing pump
* NEMA 4 enclosure
* 304 s/s construction
* Digital programmable controllers
* Solinoids
* Temperature probes
* 12 gauge s/s SF&D top and bottom heads
* 10 gauge sidewalls
* Dimpled glycol cooling jackets
* 2.0" glass insulation
* Perlick zwickle
* -40° F. to 160° F. thermometer
* CIP sprayball
* Top pressure relief valve
* 18" x 20" manway
* 14 gauge clad bottom
* 1.5" butterfly valve
* 0-30 pressure gauge
* 8.0" s/s carbonating stone
* Sight gauge
* 14 gauge cladding with #4 finish
* Four (4) s/s legs with adjustable legs
* 12 gauge s/s SF&D top and bottom heads
* 10 gauge sidewalls
* Dimpled glycol cooling jackets
* 2.0" glass insulation
* Perlick zwickle
* -40° F. to 160° F. thermometer
* CIP sprayball
* Top pressure relief valve
* 18" x 20" manway
* 14 gauge clad bottom
* 1.5" butterfly valve
* 0-30 pressure gauge
* 8.0" s/s carbonating stone
* Sight gauge
* 14 gauge cladding with #4 finish
* Four (4) s/s legs with adjustable legs
* 12 gauge s/s SF&D top and bottom heads with #4 finish
* 12 gauge sidewalls with #4 finish
* Perlick zwickle
* -40° F. to 160° F. thermometer
* CIP with sprayball
* Top pressure relief valve
* 18" x 20" side manway
* 1.5" drain valve
* 6" s/s carbonating stone
* Four s/s legs with braces and adjustable feet
* 0.5 h.p. pump
* Caustic tank
* Stainless steel cart
* All hose fittings included
* 150 ft. of food grade brewers hose
* Clamp ends
* Eight (8) hose ferrules
* Complete laboratory glassware set
* Laboratory scale set
* pH meter
* CO2 tester
* Lovibond slide comparator
|
|
|
Return to Home Page |
|
Send us e-mail
|
|
|